|
Post by pathill8 on Apr 11, 2011 18:52:31 GMT
Anybody got any suggestions ? some of the black plastic trim on our van is starting to pop out, a bit along the side, some round the toilet window and round the door, maybe some sort of grease will do it ?It was ok just seems to have happened over the winter
|
|
Mick
Full Member
'66 Safari 13/2, '66 Landrover 2a, '72 Marina
Posts: 71
|
Post by Mick on Apr 11, 2011 20:53:45 GMT
It seems to shrink over time and pulls itself out at the corners. I would see if warm water and a bit of a stretch would help it but you may need to replace it..
|
|
|
Post by michael1 on Apr 12, 2011 16:45:01 GMT
You need to replace it but if you cant find any this is how we put it in at Safari take it out of mould and put in hot water when it is flexable thred in the mould it is a bit of a nak use a piece of pointed wood to thread it in to the grove try not to streach it to much and then let it cool if it is to long cut to off surplus you can then drill avery small hole and tap a brass round head nail in to hold it in place hope yhis helps if i can help with any thing else just let me know
|
|